Skip to content

Retaining Rings, Circlips and E-Type Circlips

When it comes to fastening methods, retaining rings from SpringXpert are a cost-effective and reliable solution. Whether you’re creating an artificial shoulder or holding two components together, retaining rings offer minimal surface preparation and reduced mass compared to cotter pins and bolts. Our rings are ideal for high thrust loads and tolerances and are manufactured to meet worldwide standards such as DIN, ANSI metric and JIS, ensuring that you receive a high-quality product every time.

 

  •

    E-Type Circlips DIN 6799 D1500 Stainless Steel

    £0.07 - £0.80
    £0.07 - £0.80
    £0.07 - £0.80
    £0.07
    In stock

    D1500 E-Type Circlips Din 6799 Stainless Steel are perhaps the most widely used radial retaining ring.   Three prongs make contact with the bottom...

    View full details

  • Internal Circlips Din 472 D1300

    £0.02 - £6.00
    £0.02 - £6.00
    £0.02 - £6.00
    £0.02
    In stock

    Internal Circlips Din 472 D1300 axially fitted circlips for bores with grooves. The circlip has a large free diameter and gap width, consequently i...

    View full details

  • External Circlip with Increased Abutment Din 983

    £0.14 - £4.00
    £0.14 - £4.00
    £0.14 - £4.00
    £0.14
    In stock

    External Circlip with Increased Abutment Din 983 Retaining rings for Shafts D2100, AKM, DST and AK Series  Retaining rings DIN 983 are safety elem...

    View full details

  • Internal Circlip with Increased Abutment Din 984

    £0.14 - £4.00
    £0.14 - £4.00
    £0.14 - £4.00
    £0.14
    In stock

    Internal Circlip with Increased Abutment DIN 984 Retaining rings for bores D2000, JKM, DHT and JK Series  Retaining rings DIN 984 are safety eleme...

    View full details

  • Internal Circlips Din 472 Stainless Steel

    £0.00 - £0.00
    £0.00
    £0.00 - £0.00
    £0.00
    In stock

    Internal Circlips Din 472 Stainless Steel axially fitted circlips for bores with grooves. INT0060SS to INT1000SS- D1300/3SS to D1300/100SS Availabl...

    View full details

  • External Circlips Din 471 Stainless Steel

    £0.00 - £0.00
    £0.00
    £0.00 - £0.00
    £0.00
    In stock

    External Circlips Din 471 Stainless Steel axially fitted circlips for shafts with grooves. EXT0030SS to EXT1000SS- D1400/3SS to D1400/100SS Availab...

    View full details

  • External Circlips Din 471 D1400

    £0.02 - £6.00
    £0.02 - £6.00
    £0.02 - £6.00
    £0.02
    In stock

    External Circlips Din 471 D1400 axially fitted circlips for shafts with grooves. This form of circlip often used in assemblies subjected to strong ...

    View full details

  • E-Type Circlips DIN 6799 D1500

    £0.02 - £0.60
    £0.02 - £0.60
    £0.02 - £0.60
    £0.02
    In stock

    D1500 E-Type Circlips Din 6799 are perhaps the most widely used radial retaining ring   Three prongs make contact with the bottom of the groove an...

    View full details